Programs for Reading Text Files? 131
dotpl asks: "Recently I acquired a number of books in text format from Project Gutenberg and archived them for later reading. When
I came to read, I realised how hard it is to read text files on the computer screen, so I thought about developing a 'reader' that you can read text files with, selecting the fonts and colors you like, and which has a bookmarking feature
- a la Vim - so you know where you were reading before. Then I realised that a software of the sort must already exist. How do you read big text files without suffering from severe eye strain?" While a browser may go a long way to providing the necessary functionality, most browsers bookmarking facilities are sorely lacking for this type of work, since they don't mark the position in the page, just the page, itself. Has anything like this been written?
"Has anything like this been written?" (Score:3, Insightful)
If you truly want to save your eyes, this is by far the best solution. I don't care what kind of monitor it is, or how good the fonts look. Staring at a monitor produces considerable eye strain. Staring at properly illuminated paper does not, to nearly the same degree.
But I sympathize with the desire to save paper and ink. Hopefluly someone else has a good solution along those lines...
Re:"Has anything like this been written?" (Score:5, Interesting)
Re:"Has anything like this been written?" (Score:1)
So until computers are book-sized and book-weighted, with brighter, non-reflective screens, they will never replace books for the wonderful pastime of reading.
Re:"Has anything like this been written?" (Score:2, Informative)
All of your docs are always at hand, and open to wherever you last viewed them, and with the autooff function of palmos, you can shut off the light and read a book that, if you fall asleep reading it, saves your place and turns off the light.
Re:"Has anything like this been written?" (Score:2)
If your eyes are being hurt by looking at your monitor, you have your contrast set too high.
Maybe just lose the boilerplate at the front? (Score:1)
Search for SMALL (Score:4, Informative)
To skip the PG boilerplate, search for the text END*THE SMALL, capitalized and punctuated exactly so.
easy (Score:2)
Convert to PostScript before viewing (Score:5, Interesting)
and then use gv to peruse it. By doing this, I
create pages so that I have a sense of where I
am in the document and gv lets me easily advance
forwards and backwards using space and backspace
(seems about as intuitive as you can get).
Re:Convert to PostScript before viewing (Score:2, Funny)
-Peter
Re:Convert to PostScript before viewing (Score:2)
back one logical page. Space and backspace will
move up (down) one screen's worth on the page or
move to the next page if you're already at the
bottom (top).
Again, perfectly intuitive (at least to me).
If only all viewers could has as well a designed
UI as gv...
Re:Convert to PostScript before viewing (Score:1)
Also, if you adjust your font size and size of your editor window to resemble a page in a book, you will find your text files much easier to read
XML (Score:2)
Re:XML (Score:1, Informative)
Re:XML (Score:1)
Festival (Score:4, Interesting)
Re:Festival (Score:1)
Re:Festival and eye strain :-) (Score:4, Interesting)
Exactly the reader I wanted (Score:2)
Etexts to listen to on my Zaurus would be fun, and I don't just mean MP3s.
As someone who reads aloud, I know it'll suck because not only will there be no inflection, but the pronunciation will be marginal. Still, it could be interesting. I'm also interested in the possibility of combining this with some sort of inflectional markup language.
With a Stephen Hawkings voice! (Score:1)
No, wait, they already did that one.
Re:With a Stephen Hawkings voice! (Score:2)
EText Reader (Score:5, Informative)
eye strain (Score:5, Insightful)
Until there is a display technology available that doesn't have this problem, you're better off printing it. Rather use up a bit of paper and ink than damage your eyes.
Re:eye strain (Score:1, Insightful)
Before anybody starts an LCD/CRT flame war, please go and actually use both kinds. All too often I see people bashing LCDs because they saw a laptop back in '94 and decided that LCD tech sucks and will never improve, ever. Same goes for people who hate CRTs because they've never run theirs at higher than 70Hz, or have only used 10 year old blurry, worn-out ones. Don't base your judgements on tech by the cheap-ass generic crap sold at CostCo.
LCD (Score:2, Informative)
Until there is a display technology available that doesn't have this [eyestrain] problem
The future is now. Here's how LCDs work [howstuffworks.com].
my tips (Score:5, Insightful)
Using a sans serif font also helps readability on computer screens (the opposite of readability on paper - apparently this is accredited to the low dpi on computer screens).
Try changing settings to suit your own preferences, and don't _ever_ just blindly accept any program's default settings - especially for how things are displayed - everybody's pattern recognition psychology is unique in one way or another. Change fonts and font sizes, change screen resolution, vary the contrast (light on dark, dark on light), etc. Make sure you're using proper lighting in the room you have your computer in. These things all make a big difference, and each can vary a fair amount for each individual.
Have a day.
Re:my tips (Score:2)
Re:my tips (Score:2)
But refresh rate IS a good point to watch out for. People need to learn to configure their freaking computers.
Re:my tips (Score:2, Informative)
Sure, a video card can pump out 1600x1200 at 85Hz, but it doesn't help if a monitor can only do 1280x1024 at 75Hz. Also, the quality of the RAMDAC and the components between it and the monitor are also very critical. Some people have complained about the GeForce's 2D quality, some haven't...
That's why I love my Matrox G450 and dual monitors at work (1600x1200 @ 85Hz each)
Re:my tips (Score:1)
Eyes have towo major enemies in displays, low resolution and low refresh rates. If you need to pick only one, pick high refresh rates, like 75+ for a 17", and more for a bigger one, or get a non-flicker monitor like an LCD.
Also, black on white is much clearer, it helps focusing, the only problem with black on white is that flicker could become more visible, and increase eye strain, but it is avoidable.
Re:my tips (Score:3, Insightful)
Re:my tips (Score:2)
Either way, it's a fact that your eyes strain much more trying to pick the dark object out of a field of bright light. If you don't believe that, try reading the label on a light bulb while it's turned on!
Re:eye strain (Score:5, Informative)
I had the same concern (I sit in front of a computer 8 hours a day at work) so I asked an optometrist this week. Her answer: looking at a computer screen causes 'short term' eye strain, but no long term damage. Basically, get a good night's sleep and your fine.
Fix your lighting and display settings (Score:2)
Adjusting your monitor's brightness, contrast and color temperature settings can make a huge difference in eye strain.
The second recommendation I would make would be to put your monitor at the highest resolution and refresh rate it'll support (don't sacrifice resolution for refresh rate, though) and adjust your system's DPI settings to compensate. This ensures a 12pt font is displayed as 12pt and not scaled to something annoyingly small.
My ideas (Score:2)
If you're on OS/2, 'e' works, but tedit is less overhead.
If you're on Windoze, Notepad.
But by far, you can always print the file. Unless you have the sun right overhead it's gonna save big time on eyestrain.
Re:My ideas (Score:2)
Reading big files? (Score:4, Funny)
Wait for the movie, silly...
Fundamental problem (Score:5, Insightful)
This is a pretty well known & documented UI shortcoming with contemporary screens: between the fact that the typical monitor is backlit (thus, you're staring into a lightbulb the whole time -- and a flickering one at that) and the very low resolution compared to print (isn't typical resolution on the order of 72 dpi? that's worse than a cheap bubble-jet printer...), reading long texts off a CRT or LCD display isn't comfortable for most people. It's been written that this resolution issue is making computers a lot more uncomfortable for people than most folks realize, and that only with better screens (reflective instead of back-lit, and resolutions of say 1000dpi and higher) will reading electronic displays come to feel as comfortable as paper does for the average user.
I forget if I read about this in some of Jakob Nielsen's stuff, or Donald Norman, or maybe someone else, but in any case it's a matter that UI specialists are aware of. Last time I was reading about this -- a year or two ago now, maybe a little longer -- it was estimated that such technology is still a decade off, and I'm not sure how much progress has been made since then. Probably not much.
My favorite idea for dealing with this is the "electronic paper" being tested by groups like Xerox PARC and E-ink, where a sheet of this paper-like film has a matrix of particles that can, depending on the charge being applied to different parts of the matrix, arrange themselves to display arbitrary text or images. The idea is to figure out how to make a high quality version of this stuff that can be mass produced & sold for little more than traditional paper, so that a computer of the future might end up looking a lot like the books of the past, with the pages for the display and the computing components in the spine. That way you could have whole libraries in a portable format, textbooks (or Gutenberg texts :) could be downloaded & students would keep the same "book" from class to class, you could scribble notes on it for your own reference, or maybe even have it recognize what you're writing & use a stylus instead of a keyboard, etc. But aside from all the neat potential aspects of such a device, one of the explicit goals in trying to build it would be to end up with an electronic display format that is as comfortable & familiar as paper.
In the meantime, use a Mac or Windows (Score:4, Insightful)
I use Linux for work and for fun, but I always set it up so that most of my interaction with it is via a terminal program running on Windows. Many of my coworkers use Macs to access their Linux (and other Unix) machines, and I'll have to admit that the text on their Macs looks a little better than on my Windows machines.
None of us can put up with the ugliness of text in current Linux GUIs, which looks like the Mac of almost 20 years ago.
I expect Linux to catch up in the next five years or so (I sure hope so, because I'm using it more and more), but it's pretty hard to look at currently. I don't want to have to keep relying on some other OS to provide a tolerable window into my own Linux box.
Re:In the meantime, use a Mac or Windows (Score:2, Insightful)
Odd...I find that text on my Linux box is much more readable than on a Windows machine or Mac. (Ugliest text I've ever seen was defintely on a Power PCMac I had on my dekat at one job.)
Of course, part of it is using the right font for the job. I use Lucidia Typewriter, a lovely fixed-width sans-serif font, in my emacs and terminal windows, and it's a joy. In my browser (galeon), I get to use fonts that aren't fscked up by "anti-aliasing" (worst idea ever - making characters blurry does not increase readability!)
If you're trying to use some WYSIWYG word processor or something, there may be more of a problem - but that's a fundamental issue that fonts that work on paper don't work on screen, and vice-versa.
Re:In the meantime, use a Mac or Windows (Score:1)
"None of us can put up with the ugliness of text in current Linux GUIs, which looks like the Mac of almost 20 years ago."
I think "last years Linux GUIs" would be more appropriate. Have you looked at the gnome 2 screenshots [duke.edu], for example?
Re:In the meantime, use a Mac or Windows (Score:1)
Have you looked at freetype and the TTF fonts available? This stuff looks great and is easy to read for me.
Re:Fundamental problem (Score:3, Informative)
Try setting the background to black and the text to a low intensity shade of white (or colour). Increase the fonts to a size above average for text book reading, and doublespace. For me, it gives the least eye problems. I do almost the same for coding. Otherwise my eyes start to hurt aftere a while.
Re:Fundamental problem (Score:1)
I wonder why
Re:Fundamental problem (Score:2)
Re:Fundamental problem (Score:2)
You're right in that the biggest contributor to eye strain here is the bright flickering light in your eyes.
The solution to this is to operate your monitor at the highest refresh rate it will support and to adjust the brightness, contrast and color temperature settings to match your environment. If I open up a window that's all white, and hold up a white sheet of paper next to the monitor, the brightness and color should match. For me, this means raising the refresh rate of my monitor to 85+Hz, dropping the color temperature rather significantly and reducing the contrast.
Secondary to that, consider raising the resolution of your monitor as high as it'll go without sacrificing the refresh rate. To compensate for the apparent shrinkage in size of all of your display elements and text, instead of just making those things bigger, raise your system's DPI settings. In theory, everything should look exactly the same size that it did before you raised your screen resolution, except it'll be sharper and clearer. A 12pt font should appear the same size regardless of medium and resolution.
Re:Fundamental problem (Score:2, Insightful)
i just want to know why everyone says that having light from a lightbulb flickering at 60hz reflected into your eyes via a sheet of paper is inherently better than having a monitor flickering at your eyes directly
(if lightbulbs flicker at all, that is
anyway, what I do when i'm reading text off the computer screen is
a) I reduce the length of the lines
our vision system has a hard time tracking lines longer than X words. this is what makes you "miss" sometimes when you're moving your eyes to a new line.
b) increase the contrast to maximum, decrease the brightness all the way down (or as far as it will go down) and use a gamma control to even things out a bit (for Linux, the "gamma" and "xgamma" commands - in Windows / MacOS, the Adobe Gamma control panel. if you have access to a hardware color calibrator gadget, use that).
if you do this, i promise you that you will have so much fun reading from your monitor, you'll even be digging up your old
Re:Fundamental problem (Score:2)
It takes a certain amount of time for light to "fall off" when an electrical current stops or is reversed. For typical incandescent filaments, that "fall off" time is very long, so you would find it very difficult to measure any flickering.
For fluorescent lamps (especially older ones), the difference is more severe, as the light falls away rather quickly. Fluorescent lights used to be a huge health issue in offices. Nowadays, the phosphores tend to emit light for longer periods, so the flickering isn't as bad.
Monitors are the worst, though, since they need to be able to react to high-speed motion, so the image persistence needs to be very short.
Fortunately, you'll be hard pressed to find a monitor nowadays that's limited to 60Hz. 85Hz is typically a standard minimum and that tends to reduce the apparent flickering significantly (though there will always be some that say they can still see it). Get up to 100Hz or better and you're fine.
b) increase the contrast to maximum, decrease the brightness all the way down (or as far as it will go down)
This is the wrong way to go about it. Generally, good color calibration tools require that you first set your monitor's brightness and contrast settings to a "sane" value first, where that "sane" value means the brightest white on your screen matches the brightest white around your screen (e.g. a sheet of paper). The goal there is to match your monitor's lighting with your ambient lighting. Once that's done, additional gamma or color profile settings can be used to scale your grays and match colors properly. But still, fixing your lighting is probably the biggest thing to help your eyes.
Re:Fundamental problem (Score:2)
Step 1. Turn brightness all the way down and contrast all the way up.
Step 2. Turn brightness up just below the point where 'black' ceases to be black.
Step 3. Turn contrast down to the point where 'white' matches the intensity of ambient white.
Step 4. Adjust gamma to the point where rows of white/black/white/black lines look about the same as 50% gray (usually a side-by-side comparison)
Step 5. Adjust color temperature (or other color-matching settings) so that 'white' matches the color of ambient white. Some applications ship with color matching tiles so that you can fine-tune red, green and blue to match real-world colors on the tiles.
Re:Fundamental problem (Score:3, Interesting)
All it means is "dots per inch", and it's perfectly valid to find that ratio for a typical resolution (640x480 on the low end up to, what, 1920x1240 on the high end?) and screen size (14" for a small CRT, 12" for a small laptop LCD, up to maybe 23" for the biggest common screens today?).
For the low end, that works out to roughly 45dpi and on the high end 83dpi (approximately -- I'm dividing screen pixel width by screen diagonal inches, which isn't quite right, but it gets you in the ballpark anyway). Last time I checked, even the cheapest bubblejet printers could do 300dpi printing, and did half that at "low" resolution.
Even the best video technology available does barely a quarter of the rate cheap printers typically do -- nevermind high quality ones. The difference may not seem obvious, but it is very real, and all computer users are probably subconsciously aware of it, if not consciously -- this plays a big role in the perceived strain in reading large amounts of material off a monitor.
Re:Fundamental problem (Score:1)
Really, when you change screen resolutions, you ought to change your system's DPI settings to compensate, so that a 12pt font looks the same size no matter what screen resolution you're running at. So, you see, DPI settings do have a value in the world of computer screens.
Just about any modern text editor will do... (Score:2)
Sometimes when I find plain text not enough for the perticular item I am reading, I just run it through some scripts to turn it into HTML or postcript so I can read it in my favorite browser/viewer.
For myself, atleast, I find this is already more then enough for my day-to-day reading.
Re:Just about any modern text editor will do... (Score:2, Interesting)
For a number of packages and tips that should help you do what you want to do, check out the Display [emacswiki.org] category of the Emacs wiki [emacswiki.org]. There you'll find all the stuff you need to set up more scrolling options, nice fonts, display preferences, even moving the mouse out of the way.
I'll also second the comment made elsewhere here that using a light-on-dark colour theme feels easier on the eyes to me (I like blue-sea).
hate to day it but M$ has a good solution (Score:2, Informative)
Re:hate to day it but M$ has a good solution (Score:4, Informative)
Then, in a different session, jumping to a bookmark (M-x bookmark-jump) automatically opens that file again and positions the text where you set the bookmark (even if the text changed in the meantime: Emacs bookmarks keep some context lines with them).
OTOH, the thing I really miss is a nice program from the Amiga days called "muchmore", which provided a sort of full-screen equivalent of the well known "less", but with smooth scrolling, autoscrolling, and both scrolling speed and direction could be changed by simply moving the mouse pointer towards or away from the screen borders. IIRC, it too had bookmarks on texts.
Re:hate to day it but M$ has a good solution (Score:2)
Use Weasel Reader (Score:3, Informative)
Also the palm screen is less straining than these bright old monitors, a lot less.
Daniel
Re:Use Weasel Reader (Score:2, Interesting)
I use an m505 and it's great. Any of the newer generations palms should be great. (Don't use the nasty old green screen ones.)
I can fit tons of books on it. (My 64 meg card holds about 160 books.) I use a program called Handstory [handstory.com], which allows me to change font sizes, bookmark lines, sort books into catagories, convert documents back and forth to my computer as well as acting as an online or offline webbrowser.
It's great, since it's nice and compact. I can carry it in my pocket. My girlfriend likes it since I can read in bed, using the backlight, without disturbing her. A fully charged battery will last 8 hours, and it only takes 20 minutes or so to recharge enough to read for a couple more hours.
It is a lot more comfortable, and my eyes don't hurt from using it like my computer screen does. The only problems I have is that, 1 the up and down buttons are placed at the bottom, rather than on the sides. (Some of the new Sony Clie's have jog dials on the side.) and 2, I have a hard time working with technical books, since drawings and schematics don't do well on such a small screen.
Calmiche,
Re:Use Weasel Reader (Score:2)
Daniel
Good advice re Palm (Score:2)
And,
As for the old monochrome screen, it took a day or so to get used to, but by now I've read through a significant fraction of Project Gutenberg on that same green screen. So it's doable. William Morris would roll in his grave to see his typographical classics in CSpotRun, but at least they're available for a new generation of readers.
Re:Good advice re Palm (Score:2)
Also with software like Plucker or Avantgo you can sync things like Slashdot or a newspaper web site to them as well,so they can replace magazines as well as books.
One suggestion for those of a PC bent; there are Palm simulators (used primarily for software development) that will run on your PC and will handle any of the many Palm document readers.
Find a high quality LCD Screen (Score:2, Informative)
I want a second 17" Studio Display but I'll have to wait a few months before I can swing the $699 which is $200 off what I paid for the first 17"!
Tip: Turn down the brightness on your monitor/display, especially if the room is darker. Avoid flourescent lighting as well. You get a lot of flicker from flourescent lighting. The LCD doesn't seem to have the problem with flourescent lighting.
If you are on Mac OS X make sure you've set the Anti-Alias mode for the display you have. ie. Flat Panel or CRT.
Note: Samsung makes most of the Apple displays so look for their products for a PC clone. Really good displays.
Increase font size and experiment with black on white or white on black or white on blue, etc. I use gViM like this; change the color scheme now and then to give my eyes a break.
Printing a large book like one of the Mark Twain books would use a hell of a lot of paper. Reading 8x11 or 8x14 paper is not the same as a book either. Running something off like that at Kinko's would be expensive. You might as well go to the local library and borrow the book for real. Or buy your own copy.
QREAD (Score:4, Insightful)
Downsampled Texts.. (Score:2, Interesting)
While the original would be formatted to display on screen with all the bells and whistles it could also be "downsampled" to lower quality for other devices like a PDA or something.
But I'm just babbleing...
And when your new format can no longer be read... (Score:1)
HTML, if used properly, would be great, but people can't resist those pretty bells and non-standard whistles.
XML(XHTML for this?) would then require an additional something to parse it out and display it. That abstraction may be better design, but its a pain if all you want to do is distribute free, unfettered text.
SGML - well, most people find this one a bit... complex.
Word.doc? Shudder.
PG have only recently moved to HTML. They are concerned more with the propogation and longevity of these texts, less the nifty features.
PDA (Score:5, Informative)
2. Run this macro
InsertMode
ColumnModeOff
HexOff
UnixReO
Find "^p^p"
Replace All "QQQQ"
Find "^p"
Replace All " "
Find "QQQQ"
Replace All "^p "
3. Save file.
4. Run MakeDocW [pierce.de] (free) on the file.
5. Hotsync to the Palm/Visor.
6. Read and bookmark in CSpotRun [32768.com] (free but you can send a donation). Annotate in something else.
The only thing that'll cost you is the PDA itself and I bet a used 2-meg one isn't that much.
Look at MS Reader (Score:3, Informative)
The layout is attractive and natural, with ample margins, and no scrollbars or other such interruptions. The menus are all brought up by clicking on unobtrusive text at the top of the screen.
MS Reader also allows plugins which can be activated on selecting a word, changing pages, etc. The three I've seen are a dictionary, a translation utility and a verbal reader.
MS Reader uses .LIT files, which are pretty much just bundled and compressed HTML. It would be nice to see a similar open source book format.
HTML + browser (Score:2, Informative)
With style sheets you're able to define exactly how the document should look, and display it across different platforms and browsers.
I use this concept, along with small scripts I've written myself (you know Perl, right? :) to read Sci-Fi / Fantasty titles I've downloaded from Direct Connect on my Zaurus PDA.
Highly recommended, since you can easily adjust the screen brightness on your preferred display device and turn off the regular reading lamp that's otherwise certain to annoy your spouse.
Text to PDF (Score:2, Informative)
I would recommend this route if you know some programming and you should be able to piece something together.
uh? (Score:1, Informative)
and which has a bookmarking feature - a la Vim
So, uh, why don't you use vim then? Vim has a shitload of features for jumping around between files and remembering your spots. Just today I discovered that ctrl-O and ctrl-I moves you between files you've opened recently, furinstance. And it remembers your spot in each one. Use Gvim and change the font to HUGE and you can read with minimal eyestrain.
Import into a Word processor! (Score:2, Interesting)
I thought like Homer, "Everybody is stupid except for me." but i'm drunk so i'm a little violent now.
and i'm using windows... sigh. i have to install cygwin on my home pc... a simple bash prompt would calm me down so much... :-)
palmreader (Score:2, Insightful)
Emacs? (Score:3, Informative)
I do this on my laptop, and this helps.
But usually, I prefer to use paper.
KVim? (Score:2)
Personally, I use KVim [freehackers.org]. I set the font to something san-serif, big, and very readable, repeatedly use the 'j' and 'k' keys (for ease of scrolling), and use marks ("m[a-zA-Z]" and "m'"). I also make the KVim window really big, but not full-screen; I keep the title bar on the screen.
I do this on my monsterous LCD monitor, and this helps.
Usually, I prefer to save a tree [earthday.org].
Bet you haven't thought of this (Score:2)
Re:Bet you haven't thought of this (Score:1)
Re:Bet you haven't thought of this (Score:1)
GutenMark (Score:5, Informative)
Re:GutenMark (Score:3, Informative)
GutenMark is excellent, once it has chapter recognition for contents table linking directly yo chapters in it's HTML output it will be top notch
If you take html output from GutenMark you can feed it to the free (as in beer, not speach) MobiPocket Publisher [mobipocket.com] you can then view the resulting compressed ebook practically on any platform including the new P800 using the free mobi pocket reader.
PostScript formatting (Score:3, Interesting)
Weasel for palm (Score:2, Informative)
Also, it comes with programs to convert .txt files, so you can also use ps2ascii and read postscript or even PDFs.
Plucker (Score:1)
Emacs, part 2 (Score:2, Informative)
Someone already mentioned Emacs, but...
It'd be trivial to bind a command to a key that allows the bookmarking of a file (ie, saving of a line number to .#filename or some such), and another jump-to-bookmark function as well. Heck, if you were feeling particularly l33t, you could extend normal text mode to do it for you (ebook-find-file automatically jumping to bookmarked line). As for fonts, it's quite simple to either change the fonts in XEmacs or (as I prefer) simply up the font size on your terminal emulator.
The nice part about emacs is that you can also write a quick script to remove useless text, like the license stuff at the beginning, since most of it is standard cut-and-paste. Not that you'd want to distribute such an edited copy, but for your own personal use. Plus, it's not like you have to go download emacs from some site...
check out the alt.binaries.e-book faq (Score:2, Informative)
look at the e-book readers section. You will find something you like on that page.
Here's how _I_ do it: Rocket eBook (Score:3, Interesting)
Well, you asked... I have a number of scripts--they're written in Apple's MPW, but think "shell script" and "egrep" and you'll get the idea--that are specifically tuned to Project Gutenberg's format. Massages line breaks, provides true open and close quotes, and so forth.
They output the particular restricted subset of HTML that's acceptable as input to RocketLibrarian. Then I use RocketLibrarian to download them into my Rocket eBook, which really has very good characteristics. The size is right (midway BETWEEN PDA and laptop) and the screen is very readable.
Unfortunately... the Rocket eBook was acquired by a bunch of business geniuses at Gemstar who proceded to morph it into the REB1100, which is essentially identical to the Rocket EXCEPT that you can ONLY use it to read purchased (and expensive!) content. No "personal content" allowed any more.
It's a pathetic mess and if I get started I'll rant for hours...
But the bottom line is that I've NEVER been able to read comfortably from a fixed CRT sitting at a desk. And I've NEVER been able to read comfortably on cramped 160x160 pixel Palm.
But reading from the Rocket, which I purchased mainly for the specific purpose of reading PG texts, I read pleasurably and comfortably for hours.
It's a darned shame that the eBook industry has seemingly killed itself through greed and digital restrictions management.
Re:Here's how _I_ do it: Rocket eBook (Score:2)
If you can get your hands on one of the original Rocket eBooks, I highly recommend it.
Re:Here's how _I_ do it: Rocket eBook (Score:1)
Then import the
ToM Reader (Score:2)
Palm works great for me (Score:5, Interesting)
Like other people suggested, I use a Palm. I've been using iSilo [isilo.com] since it's been out; this is great for all kinds of stuff, including gutenbooks. I do a little work on 'em before hand to actually convert them to HTML (I don't understand why Gutenberg doesn't do this, but ... whatever).
I used to use a Palm Vx (160x160 4-bit grayscale), but have since moved on a 320x320 Sony Clie. When you get into a beat on the reading, turn on the autoscroll, and you don't even have to touch the PDA. The new Clie-with-a-keyboard's have 320x480 displays, and it sounds like from the description at iSilo that they support that mode. It's really a nice, inexpensive, well-supported program.
Be careful in looking at PDAs for displays that smear or bleed display contents when scrolling. For some reason, a lot of b&w Palms do this, and the color ones don't (at least the Sony Clie's don't seem to). I'd go nuts if I had to put up with a crappy display while reading. Bonus for reading off a PDA, if you can stand it, is that you don't need a light source. In fact, I have read my kids gutenbooks at night, and we turn off all the lights: my book becomes the light source.
I was also briefly thinking about getting a Rocketbook. I think this would probably be another good way to go if the screen is nice and big, doesn't have tracers when scrolling, and I can put anything I want on it.
emacs ? (Score:1)
after all can't you use emacs for EVERYTHING ?
Listen! (Score:2)
I like using text to speech synthesis software such as Festival [ed.ac.uk] to have text read to me while I work. Granted it's not always the most articulate, it gets 99% of the job done just fine..
"list" (Score:4, Interesting)
Link (Re:"list") (Score:3, Interesting)
Re:"list" (Score:1)
used to use it for everything, these days I use less for most everything
ascii2pdf or txt2pdf (Score:1)
spits out a pdf file you can read with any pdf viewer.
http://www.bulldog.tzo.org/ascii2pdf/ [tzo.org]
txt2pdf is shareware.. more features..
http://www.sanface.com/txt2pdf.html [sanface.com]
Good text readers.. (Score:3, Interesting)
I personally prefer Tom's eTextReader myself, have read some fairly large texts on it (Gibbons Decline and Fall of the Roman empire, for example). you can set background colours, it actually renders the pages like a book (double columns).. YMMV, but I read a lot of texts off the screen and I havent found anything better.. This assumes that you're using Win32, of course.
For a Palm OS device, Weasel Reader rocks..
why not vim or emacs? (Score:1)
I've read quite a few books in xterms with -bg steelblue4 -fg #e8e8e8. Your preferred colours might vary slightly or a lot, but isn't it nice to be able to read a document in X11, bookmark it there, then open it later while on a virtual console and still be able to find the bookmarks?
Re:Does Not Matter... (Score:1)