Why Haven't UPSes Been Integrated w/ PC Power Supplies? 36
antiher0 asks: "A while back, while connecting the batteries to 20 UPS's at work, I had a revelation. Well... maybe it wasn't that subtantial, but I thought of something that noone I talked to could answer. UPS's work by storing energy in a standard battery (undergoing a transformation from AC to DC in the process). When the power goes out or a brownout occurs the energy stored in the battery gets converted into AC and is sent down the power cable to the end device where may be converted back to DC again (as in the case of a standard PC). These conversions between AC and DC are not very efficient. Why not just have a system that places the battery and logic board within the power supply of the PC? (or at least hooks up to the power supply, the battery need not physically reside in the power supply) By doing this, you streamline the whole process and make the whole thing a bit more convenient. There are, of course, more issues to deal with, but I think it'd be feasable." This is a good point. If PC power supplies were external, they could be integrated with the battery/UPS and maybe we could save a bit of energy by performing one less AC-to-DC conversion which could potentially save some wear on the battery. Is there any reason why something like this couldn't work?
Wallwarts (Score:1)
It's all about the Benjamins (Score:3)
I would imagine that if such a combo UPS/power supply were to be introduced, most folks and reviews would still prefer to purchase and use their own favorite standard models. Folks like a choice, even if it means taking more wattage from the wall. Just look at modern x86 CPUs. Someone could make a modern all-in-one workstation based around a newer rev of the Crusoe or StrongArm and some cots chips to accelerate video, etc. Have the chip makers and your own design teams understand the need for power conservation. Could easily end up with a highly efficent, cool-running, and still powerful workstation if it was a well-designed and well-managed joint effort. But... there is no way it would be cheaper than building your own PC piecemeal and just getting a beefy power supply.
More (electrically) efficent hardware would be nice. Powerful hardware is always nice. All-in-one is neat. Choice is good too. A cheap price would be perfect.... but they just don't go together too well, plain and simple.
Laptops have this :-) (Score:5)
I guess one of the problems with desktops is that the monitors still require AC power, so it'd be useless to have a battery integrated in to the box if it didn't have a DC-AC converter to supply power for the monitor. Then the power wasted to power the Monitor would probably make the savings from skipping the DC-AC-DC conversion for the computer not very worth while.
If you had a DC powered LCD screen, on the other hand, then it would probably make sense.
Don't they already have these? (Score:1)
Already Exist.... (Score:2)
It appears there are three main types. Those which replace the existing atx supply [ups2.com], those which Plug into an PCI Slot [guardian-ups.com] and those which fit into a drive bay. [beam-tech.com]
-----------------
Should UPSes be tossed? (Score:2)
Now, I know that this applies to surge devices in power strips - I've opened them up and seen the fused breaker. I'd imagine that YMMV depending on the brand of UPS (I have APCs on all the equipement around the house, and a big honking APC under the main rack in my home office (my colo NOC has two massive IBM things each the size of my truck)), but I've always wondered how much damage the cheap, common UPSes (and computer case power supplies, for that matter) can take before they should be replaced.
And yes, I am posting at 5:47am, late at night, not at 5:47 in the morning. Can you tell?
--
Evan
-48VDC (Score:2)
On telco-equipment the standard input is -48V DC. You can get routers/switches and PC power supplies with this input, too.
In case of a blackout they simply run on 4 lead-acid batteries.
This may be very convenient when powering your computer from solar cells, but unfortunately these -48V supplies tend to be very expensive :-(.
Comment removed (Score:3)
The answer to "why" (Score:3)
The PC market is extremely cost competitive. The power supply is one of the least important components to most computer buyers.
Also, most computer users in general would turn all electronic equipment off in a storm. If you're on a reliable power grid, a storm is about the only time you might lose power. I can only think of two or three times in the last decade when I lost power when there wasn't a storm.
An added cost part that many people will never see the use of is a very hard sell in such a cost competitive product.
Such a beast exist. (Score:2)
Re:-48VDC (Score:1)
This may be very convenient when powering your computer from solar cells, but unfortunately these -48V supplies tend to be very expensive :-(.
No more expensive than four 12V car batteries at whatever rated current you want... :-)
In fact, I believe this is exactly what the telcos tend to use. At least at our one POP we have some equipment run off of the 48VDC supply. (I just call it 48VDC, they (telcos) reference things backwards in my eyes. If anyone can explain why I'd love to know just for knowledge sake.) -- Anyway, the supply is a bunch of deep-cycle lead-acid batteries very similar to the marine-style batteries you buy for a boat with some float charge circuitry and DC breaker distribution panel.
The actual telco racks (what the OC3 is bolted to and Bell has a hissy fit if you poke around) use smaller batteries since they're only powering their own equipment, while the POP is actually providing enough juice to power whoever hooks up to it.
Other things I need to run (Score:1)
The main reason I prefer my external UPS is that I need a couple other key things to keep running in the event of a power glitch, like my monitor and Ethernet hub.
Also, since most offices these days tend to buy prebuilt computers from places like Dell or Compaq or Gateway and then "retire" them after a couple years, you would always have to be buying a new UPS every time you upgrade. Unless the UPS addon gets down to floppy drive costs, I wouldn't see them catching on. Who would want to buy an UPS just to re-purchase it again in 2 years? And who wants to change power supplies out in the 50 new computers we just bought for accounting so we don't have to throw out the UPS and don't want to spend an extra $300/system to buy new ones?
Re:-48VDC (Score:2)
We actually have PBX here where I work, and its the same thing, about 6 batteries inbetween the building power and the PBX.
As a point of interest, if anyone remembers the big "telephony blackout" awhile back around Toronto, where even 911 calls were down, the folks at Bell in Ottawa explained what happened. Apparently someone was changing batteries, or working near them, and a wrench fell onto the batteries and happenend to connect the + and - connectors (which are bare metal). As a result, a lot of equipment fried. Guess their surge suppression wasn't quite up to snuff!
Re:Redundancy (Score:2)
I suppose you dislike DVD-ROM/CD-RW combos and embedded CPUs with builtin bus and network controllers too. Some consumers have a use for these things even though you feel that most do not.
Many times there are overwhelming reasons why you want to combine components. I think his reasons are quite good. After all, there is a significant waste of power in going from AC to DC, from DC to AC, and then back from AC to DC as you go from wall to UPS battery to power supply to computer components. There's no reason to shoot down the idea for everybody else. Sometimes simple designs are inadequate.
I think the only reason these haven't taken off is that many people haven't thought of it, and most OEMs wouldn't use them because they would jack up prices. If they became better known, I'm sure that the market for them (especially in the business world) would take off.
Re:-48VDC (Score:3)
Q: Why use a negative charge (-48 volts) for Ring instead of a positive charge (such as +48 volts)?
A: The reason for doing this is galvanic corrosion protection. A conductor with a negative charge will repel chlorine ions, as Cl (chlorine) ions are negative also. If the line were to have a positive charge, Cl ions would be attracted.
This form of corrosion protection is called cathodic protection. It is often used for pipelines, bridges, etc. Such protection was very important in the days of open wire transmission lines.
From:
http://mirror.lcs.mit.edu/telecom-archives/arch
(Take out the spaces)
Re:Should UPSes be tossed? (Score:2)
REAL
That's not redundancy... (Score:3)
The UPS is such a big chunk of hardware because it tries to output 110 volts 60 Hz. Putting it in the PC's switcher eliminates all those frequency and voltage constraints, and makes it vastly smaller, lighter and cheaper. Plus, you have other markets open up:
--
spam spam spam spam spam spam
No one expects the Spammish Repetition!
Re:Laptops have this :-) (Score:1)
Huh? I think that people have UPSes so they can stare at their monitors when the lights are out are in the minority.
More often people use UPSes so that their work doesn't get lost when there is a brief power outage, or to keep a server up during a power outage. Neither of these things require a monitor.
UPS integration (Score:3)
Excellent idea (Score:1)
http://www.arisecomputer.com/ps/html/index.htm
Looks like they've got models for just about any voltage you want. Now I gotta see how much it will cost...
BTW don't use deep-cycle batteries or car batteries for a home DC power system; as electric-vehicle enthusiasts will readily tell you, golf-cart batteries give you the biggest bang for the buck. They are bigger, and handle deep-cycling better than so-called deep-cycle batteries. Car batteries can't handle deep-cycling at all.
12V is convenient for being able to also run a lot of automotive and RV type accessories from your home DC system (flourescent lights, lots of small electronics that normally use wall-warts which output 12V, a few old laptops, radio equipment, etc.) but a computer will demand a lot of current at such a low voltage. I'm wondering how many I can realistically run from a couple of golf-cart batteries, and might need big bus bars too instead of wire.
What about long power outages? (Score:3)
--
Money's one constraint, safety's another. (Score:2)
Despite all of the AC to DC to AC to DC conversions involved and efficiency loss each time, the current system of inserting a UPS inline between the wall socket and the PC power supply is probably the best compromise currently do-able. You save money on a standardized PC power supply, you don't have to worry about leaking acid eating up your motherboard or hard drive or the battery exploding inside your PC, spraying acid everywhere, or dying an early death because of the heat, and you can get as small or as large a UPS as your needs and budget dictate.
Re:It's all about the Benjamins (Score:3)
But, the thing works. We've got one in an ancient full tower AT case at work, which had its batteries replaced a few years ago. No trouble to report about it.
If anyone wants one, scout the hamfest/flea market circuit or Ebay. If memory serves, the only external clues that it is a UPS are that it is painted black, and a good deal heavier than other similar supplies.
Re:Should UPSes be tossed? (Score:3)
They operate by shunting to ground when voltage potential rises above a certain point (usually ~250VAC), which hopefully absorbes the spike until a circuit breaker or fuse pops, and hopefully even after that, should there be sufficient potential to arc across the fuse/breaker.
After a number of cycles of this, they eventually fail.
All of them.
And there is no method (at least, none that I've seen) which can accurately determine when they're no longer capable of conducting, short of physical examination (hint: if it's blown into bits, it doesn't work) or destructive tests (ie, hit it with 300VAC and see what happens).
That said, they're cheap. They're readily available (Mouser Electronics or Digikey). They're easily replaced if you're handy with a soldering iron. And, while periodic replacement of them will preserve the surge protection capability of the unit, it will also void any warranty or insurance you might have had before with your potentially-broken device.
(And, no, those little LEDs marked "Protected" on your surge protector are not functional. It's just a resistor and an LED across the power line, so it's absolutely nothing more than a power light. By design.)
No magic, here.
Integrated UPS in a computer (Score:1)
Re:What about long power outages? (Score:2)
PCs are built safe in the knowledge that they're connected to a constant supply of power and it doesn't really matter how much they use. It's not even the PC itself so much as that big glowing box on your desk as opposed to that little, dull, low-power draining one that folds out of your laptop.
Take a look at the domestic UPSs that are available. You'll notice that they're rated in time they last for a given power load. Unplug the monitor from the equation and they'll last dramatically longer. Now look at the size of them and their relatively short lifetimes. For a PC, I'd be suprised if anyone could make a battery that'd power them and a monitor for any length of time that'd actually be small enough to fit in the case.
Remove the monitor from the equation, replacing it with a low drain equivalent (which is where a chunk of the laptop cost comes in) and assuming you can provide that for about normal desktop costs, whack on any domestic UPS and you've got your solution for the sort of money you're talking about.
Unfortunately, there's not a low drain monitor option for about the same cost/quality as a CRT.
Re:The answer to "why" (Score:1)
However when its time to replace the ATX style power supply, how about the ATZ(?) power supply be able to include a UPS as an option, so that those who want the added protection can get it.
An intergrated UPS would have the benefit of not wasting power in multiple conversion processes, and have more power left to keep the PC running.
Been Done (Score:1)
In the late 80's, Banyan made a whizzy NOS that ran circles around Novell 3.x . . then, because the IBM compatibles of the day didn't have the oomph to run the OS, Banyan made a box called a Banyan Network Server (BNS).
Okay it was really a Unix box (which is what Banyan was) but it was tower sized, and had an internal UPS. Among other nifty features.
Anyone left who knows Banyan can correct me on the details.
It's a standard layer of abstraction dude. (Score:1)
Point is there are tons of devices, not just PCs using that standard API. And you might just need them during a power outage.
The Home User, is likely to want the monitor and modem powered during a blackout (and protected during surges). Last X kilobytes of download...
The SysAdmin, probably wants the network equipment (switches/hubs/routers) powered - if the server is up, you might want it to be network reachable eh? Plus the other peripherals - external tape drives, storage arrays etc.
You might even *gasp* find a monitor handy when you're at the console and you have something important to say to the UPS software during the blackout...
Or you may just want to plug in your notebook with a dead battery.
So many reasons, compared to the very little gain from building in a UPS to the power supply.
It's very nice in theory but the Real World gets in the way.
Cheerio,
Link.
UPS2 is the best internal UPS so far (Score:1)
Reasons:
1. AAP's Internal UPS works with Pentium IV and T-birds. (atx 2.02, atx 2.03)
2. Longer support. AAP uses 400-500VA back-up unit. (Amsdell is 120VA.) I got 45 minutes on my PIII 550 station, and 35 minutes on my Athlon 1.2 GHz
3. Also supports Monitor. (Amsdell does, too)
4. I can double or trible the battery package if I need more back-up time. (so, I can get 90 minutes back-up if I want to).
5. Cheap. I got a 250 watt power supply and a back-up unit for only $99. (a COMDEX show special price). They told me an additional power back-up unit costs $49. If price is a major concern for some of you, just wait till they drop the price. I think the price will go lower than $60 in 12 months or so.
6. The company is from Rhode Island.
Re:What about long power outages? (Score:2)
Now, take into account that some fraction of the users in most companies are also going to want laptops. Now, take into account that the laptops will continue working without power, without a UPS. Now, you're starting to add up some change.
Next you should think about your PC admin. The difference to him/her is that, instead of having a clunky box that you have to crawl under desks to service, you have a small box ON TOP of the desk.
All the way around, laptops are the best choice for most causual users. Designers tend to not like laptops because the LCDs suck, but that's a small (or absent?) portion of most companies.
Re:Missing the point (Score:1)
In fact, all AC power supplies on all computers do an AC -> DC -> AC -> DC conversion via a high speed switching circuit. Ever wonder why a 400 watt computer power supply doesn't have a 20 lb. power transformer and soup can sized filter capacitors like an automotive battery charger of the same rating does? Once upon a time, they did, but improved power transistors did away with the need for a huge roll of wire wrapped around a heavy chunk of iron. The AC from the wall is converted directly to about 160 volts DC via a bridge rectifier and a couple capacitors. Then the 160 volts DC is converted back to AC via transistors, except at much higher frequencies, say 20 KHz. This 20 KHz AC can then be stepped down to +12, -12, and +5 volts via a much smaller transformer. It would take a great leap of electrical engineering understanding to understand why, but the higher the AC frequency, the smaller the transformer needed to step down voltage, and the smaller capacitors needed to filter the resulting lower voltage after rectification.
To make a 12 volt power supply would require a redesign of the circuit, but the +12 volts DC would still have to be converted to 12 volts AC at 20 KHz, then back to +5 volts, +12 volts, and -12 volts, a difference of 24 volts, via a transformer and some diodes and small capacitors. You can't get 24 volts out of 12 volts without converting it to AC and stepping it up somewhere along the way.
Re:Missing the point ( I did not) (Score:1)
Re:Laptops have this :-) (Score:1)
The other responder to your post made some good points. The other one I'd like to add is that many PCs (depending on the software you're running) don't do "unaided shutdown" very well. The only to shut them down cleanly seems to be to close the applications manually and select "Shut Down." (Mostly, 'doze boxes with some annoying driver that doesn't work well with Suspend. I have a laptop I use (not mine -- it belongs to my employer) that falls in this category.)
--Joe--
Re:It's a standard layer of abstraction dude. (Score:1)
It amazes me that this post is rated only 1, while the original post is rated 5.
Anyhow that's exactly right: It is a standard layer of abstraction.
In countries that have uncertain power, the UPS is needed 20 times a day. The UPS provides surge protection and power to bridge short outages for several devices, not just the monitor and computer.
Uninformed moderating like this makes it necessary to browse at a low level, so as not to miss important comments.
Re:AC is efficient for changing voltages (Score:1)