Splitting Mp3's 16
caseydk writes: "I'm working on a project that needs to take a single mp3 (a live recording) and play individual sections of it. Preferably, so that the user must only download a portion of the mp3, instead of the whole thing. Unfortunately, most (or all) mp3 splitters that I have found have a gui. I'm looking for something command-line, so that I can just have the server do it during low usage times or (worst case) on the fly. Any suggestions?"
mpg toolbox (Score:3, Informative)
It's heading for a stable 1.0 release.
You can find it on http://mpgtx.sourceforge.net [sourceforge.net]
By the way, splitters with a gui?
I find it hard to find a mpg splitter with a gui.
I do know mpgcut (or mpcut?) and bc2000.
Which ones are you referring to?
MP# Butcher (Re:mpg toolbox) (Score:1)
-te
headerless format (Score:4, Informative)
I've tried this and it sometimes works and sometimes doesn't depending on the player, since the start of your file snippet will have junk in it, but it seems to me that it would be an easy programming exercise to create a program that would lop off the leading junk until it finds the next valid MP3 frame.
I don't claim to know much about MP3 format, but it appears from a quick session with a hex editor that frames start with 0xfffb9200 - can anyone verify this? If so, you could hack out something in an hour that would be fast, scriptable and do exactly what you want.
For extra credit points, you could then use mp3info to add id3 tags so your file will look cool when playing in xmms or whatever.
Re:headerless format (Score:3, Informative)
Not that easy (MP3 bit reservoir) (Score:3, Informative)
If you're encoding MP3 files and intend to split them like this, try to disable the bit reservoir. If you use LAME, the --nores switch will disable it. This may degrade quality slightly, but if you're using VBR or ABR mode it won't really matter. Instead of "lame -b 128", use "lame --nores --abr 128" for example. Then you can split the MP3 without problems.
Re:headerless format (Score:1)
I've done this... (Score:5, Informative)
I know about the MP3 file header but before I knew about it I was chopping MP3s just for kicks. It works, it's easy and knowing the kbps of the file you can calculate the exact point to start and end. Example:
dd if=biggie_file.mp3 of=shortie_file.mp3 bs=1c seek=200k count=150k
It REALLY does work and it's command line - not to mention all the piping possibilites.
Sorry, dd chopped mp3 files do not always work. (Score:1)
For downloads where you don't know what will be playing your file, I'm afraid that you must clean up the front of the file first.
It is realy easy to make mpg123 report: Illegal Audio-MPEG-Header 0x3818402e at offset 0x367. or something similar and play very annoying screeches after using dd to chop mp3 files.
Re:Sorry, dd chopped mp3 files do not always work. (Score:2)
I chopped an episode of the HHGttG a few weeks ago - I wanted to put the 'Share and Enjoy' song onto my MP3 player - and after locating the spot it started and for how long it played I dd'd it and presto - I passed it through mpg123 and it worked.
I guess it's just a matter of luck finding the correct spot to grab a header.
Re:Sorry, dd chopped mp3 files do not always work. (Score:1)
for i in 0 1 2 3 4 5 6 7 8 9; do
for j in 0 1 2 3 4 5 6 7 8 9; do
dd if=yourfav.mp3 skip=1${i}0${j}00 bs=1 count=30000 of=test${i}${j}.mp3
done
done
for i in test*mp3; do mpg123 $i; done
I get 30 that mpg123 won't touch at all (returns failure code), and a few more that it attempts but makes a gawdawful screech. Xmms will play them all. Go figure.
Point is, I would not stand for that sort of failure rate from a web site I was in charge of, especially if I have no control over the player involved. Would you?
Splitting MP3's (Score:3, Funny)