Ask Slashdot: Printing Options For Low-Resource Environments? 108
bjhonermann writes "The Zambian government (along with partners) are currently rolling out an electronic medical records (EMR) system in public health facilities. The project has been going on for some time and is already in 600+ facilities with more than 700,000 patient records. One problem we're facing is that most information is still being double entered in the EMR as well as on primary paper documents at the facility, and sometimes additionally transcribed to paper registers. This double/triple entry takes time away from nurses who are already in short supply. There's an inability to fully move away from partially paper based systems both because clients often move between 'paper clinics' and 'electronic clinics' in the same communities and for follow-up care, and because the power systems in many sites are unreliable and require that there be sufficient paper backups of records for operations during periods where power is unavailable — perhaps for weeks at a time. We're providing solar panels and battery backups for sites, which work increasingly well with newer low power CPUs, but even if the power issue were solved this would not address the need for portable paper documents. The key objective of eliminating redundant manual entry of forms and paper registers by nurses might be accomplished if we had low cost low power B/W printers available at sites so that critical information could be entered electronically and then printed out as needed, either for client carried purposes (transfers/visits to 'paper facilities') or to serve as local backup when power is an issue. However, we've yet to find printing solutions that seem appropriate to the context and are hopeful the Slashdot crowd may have some ideas."
Read on for some more specific criteria.
bjhonerman continues, "Criteria we're looking at:
1. Reliability: The printers need to be very low maintenance and be able to cope with dusty environments.
2. Cost: Obviously, costs need to be kept as low as possible. No cap on the cost of printers precisely, but the net cost per page over time is critical. More expensive printers with cheaper and standard consumables are likely to be preferred to cheaper printers with expensive consumables.
3. Ink duration/lifespan: While all sites would be printing at least weekly, the amount actually printed may vary between no more than a few pages each week to several hundreds of pages. This means that whatever ink/toner cartridge/etc needs to have a long shelf life as well as lifespan. Zambia is not terribly hot, but has a humid rainy season and no climate control can be expected.
4. Low power consumption: As stated, ~15% of sites (and growing) are operating only with solar panels.
5. Quality: The quality of the printing can be quite low. Must be legible but can be ugly. No need for color. However, the pages/text need to have approximately a 5yr duration before the ink is unreadable.
6. Label Printing: There is also a need to print labels for specimens (freezer tolerant) and for drug dispensations. This may well be a different product, and early implementations will be in higher volume facilities that might not be as sensitive to power, but there will be a need for a low-power version eventually.
Our instinct is that dot-matrix printers would fit the bill nicely, but the options there seem to be limited and the long-term sourcing of supplies (ribbons, perforated paper) isn't entirely clear. What other options would the Slashdot community recommend?"
No good solution (Score:5, Insightful)
You're assuming that throwing some hardware into the mix will fix this problem (as is apparent by the detailed hardware specs you're supplying). It will not. I speak from experience as having been part of a multi-million dollar project to to convert a group of US hospitals from paper charts to EMR back in the late 90s.
Think very carefully about what you're trying to achieve here. Essentially what you're doing is conceding that the EMR cannot be the entire record, and thus by supporting paper you are reverting back to the paper record being the authority in the patient record. We made that mistake as well, and the result was consuming VASTLY more paper after the EMR was installed than before when the records were totally paper.
The problem is that medical records are incremental. If a patient comes in and has some lab work done as a followup to make sure a treatment is having the desired result, then you have a set of new information. You have two options here. You can either print out a new sheet with just the new information, and throw that into the paper chart, or you can reprint tables of existing information so the new information is integrated into the old information in a more usable way. Throwing a new piece of paper into the record is a horrible option. That is not the way the paper record worked before when entirely paper, and it results in a fragmented record that a physician must flip through page after page and try to condense the information all in their head.
Look back when records were 100% paper. It was optimal from a resource / paper standpoint. Most of the records were actually blank forms, and the providers would simply enter new information by hand. So a nurse may have a chart in table form where they can record vital signs. The information was laid out in such a way that a physician could easily scan across the values and observe changes over time. The beauty of this is a single piece of paper is only needed for many incremental documentations. There is no good equivalent for this with an EMR with printed records. You cannot add information to an already printed document that was generated in an EMR. If a nurse documents directly on the output of an EMR then you're hosed. You now cannot throw that piece of documentation away and completely regenerate it when new information has been added to the EMR. It will be a nightmare, and the worst possible result, which is having information strewn across multiple formats, systems, and even across multiple pieces of paper.
Really, the only proper solution is all or nothing. Either make the EMR work as it is supposed to, or go back to totally paper records. There is no in-between, and if you attempt it you will be printing far, far, far more paper than ever before.
One final comment, is if you're intending on using printed records for only one specific use, like physically transferring records to a new facility, then that is fine. However using them as backups or working documentation will not work, as I said before, because they are incremental documentation that cannot easily be appended to in paper by an EMR.
Does Everything Have to Be Electronic? (Score:2, Insightful)
I know everyone wants an electronic everything, but it sounds like in your situation paper records may actually be optimal. If you have to have a paper system in place anyway, why do the added expense of going digital as well? Sometimes, what is really needed is to optimize the paper system, rather than replace it with an electronic one.