What Qualities Make Good Technicians? 14
rderek asks: "I am an instructor at an educational, and my focus is on computer technicians (not sys-admins). The course that we run is very demanding, and produces (we think) very good techs. We are allways in the process of adjusting our cirriculum to remain current, but it may be time to adjust our teaching process. What we want is not simply to create people who know how a computer works, but who also have the attitude and mindset of good technicians. I would like to know what each of you consider to be the qualities necessary for a person to be a good tech."
curiosity in a hackish sort of way (Score:4)
Any new toy^H^H^H piece of equipment that comes into the office has the lid opened to check for new stuff. Articles about novelties must be followed up - it took me weeks to search out enough information to be comfortable with how sterling engines run.
Much to the distress of my mother, I must plead guilty to having a track record for pulling things apart from a very young age, but mostly putting them back together in a working state. Of my friends who are techs, most have the same story.
Hardware of all sorts is fascinating. The first time I see anything new, I find myself thinking out how such a machine would operate. If it is not immediately apparent, then the lid must come off, or the plans be searched out to satisfy my need to know. In this way a general knowledge is built up so that tech people have a feel for what is right, and get hunches about a faults, that then pay off when repairing unusual faults.
Re:curiosity in a hackish sort of way (Score:2)
Z&AMM (Score:1)
Problem Disection (Score:1)
I went through a Mechanical Technologist program at our local tech institute and the problem solving skills used throughout engineering disciplines are useful for isolating and locating problems.
For a fun in-class example, use the old game 20 questions. One person thinks of anything they want, and the other has 20 questions (yes or no answers only) to guess what the other is thinking of.
If it takes more than 10 questions, then you need more practice.
Critical thinking skills (Score:1)
Just my
Problem solving (Score:1)
In other words, don't teach solely with textbooks. Use real-world examples. See if you can give labs where you create a problem, and they try to fix it. Teach them how to teach themselves new things - give them enough to get started, and try to hone their instincts to be able to isolate causes, not just symptoms of the problems.
Also teach them that "I don't know" is an acceptable answer. Too many technicians get so caught up when they don't know an answer that they begin to blame problems on totally unrelated things (ie: I can't connect to the database. It must be that damned Linux box on the network causing the problems - and yes, I've heard this one). Teach them how to research their issues. After all, the wisest of people don't have all the answers, but rather they know where to look or who to ask to find them.
people skills (Score:1)
that often gets called in on business
critical outages i think the most
important and hardest skill iv had to learn
is how to handle people in a stressfull
situation. With fellow puter geeks it is
easy but 99% of the time it wont be a
puter geek your dealing with.
I have seen some awesome techs that were
no good in the field because they didnt
have the people skills needed to deal
with non-technical people in a stressfull
situation. I have also seen some lousy
techs that get good reviews from clients
because they have a good "computer side"
manner.
Re:people skills (Score:3)
Whenever meeting a client, regardless of situation, i usually find myself in stronger positions when i've kept my mouth shut - meaning only that they will almost always ask "do you think its xx or maybe Z?" - Safe answers sound something like..."I don't know, could be. You have my full attention now and I'm sure we can straighten this out." . Expounding with a client on all the things that COULD be wrong wastes a lot of time. Get used to " I've not seen that before. Tell me about the.... " --sometimes helps to seem a little impatient with the conversation ( if it seems pedantic), to keep walking toward that which is misbehaving.
Helpful too is an ability to nicely shut them down when they begin relating the long list of corrective measures they have already undertaken to fix the problem. i don't mean to say don't listen to them (one MUST!) instead initiate and control the verbal exchange with something like:
" You may have taken steps to correct this but please understand that even if you did I MUST be thorough... which may even mean repetition of some of your actions. I know this may be difficult but you will only distract me and prolong the analysis by bombarding me with questions. Let me ask you questions, and you try to be concise with the replies- we'll figure this out." --Clients like to think they played a part in finding the solution. Often they do.
-Empathy helps too. especially with MS products. <scratch head> "I am as perplexed as you, let me scan the newsgroups and see if anyone else has this problem" <--buys time.
A cardinal rule- never insinuate that anything anyone did was "stupid" either outright or by tacit agreement. This goes on alot. The bigwig or your contact or a guy who walks up to check on progress may be trying to cast a co-worker in a bad light, don't provide the ammo. everyone has expertise in their arena, recognize that, try to give credit to people for any positive actions and remain neutral.
and don't forget to eat beforehand if you think its gonna be a long one....
understanding how things work (Score:1)
I remember a dialogue between me and a colleague some weeks ago:
Me: "Now I've got something strange: everything works the way it should, but I don't know why."
He: "So be happy, this is everything you want."
Me: "I don't think so."
As a technician, you should not be satisfied if things work - you have to know why they are and, in the case that they don't, how you get them working.
Just my $0.02.
Qualities (Score:1)
I've met a lot of younger techs that are really sharp, but have a lot of attitude and do not follow through on tasks. I would look for professional technicians with open attitudes that can work well in team environments with little leadership and that are consistent in performing their jobs' functions.
-Pat
Need to train a good tech? (Score:1)
I'll be honest: I think the best techs have aptitudes and a mind-set that can't be outright taught in a classroom. Some students will have the gift, most will not. The only thing you as the instructor can do is learn to recognize which students DO have the gift.
A technician with the gift easily deduces answers about the inner-workings of an unfamiliar system by observing and experimenting. One without the gift will shrug and insist that without a user-manual or a technical support number he/she cannot learn anything new about the system in question.
There are other signs, but in general this is IMHO the most noticeable. Some students who have the gift need to be more enticed than others in order to be discovered.
The most effective way I've found to help students discover the gift for themselves is to present them with a "hypothetical" system and ask them how *they* would engineer the system to make it work a certain way. Then show them how the "hypothetical" system actually *was* engineered. Do this over and over building upon each lesson with a new "hypothetical" system. Soon some of the students start to predict how the systems work without you having told them. That is when you *really* know that they understand the systems they need to work with.
Formula for fixing a technical problem... (Score:1)
The best technicans balance these, usually picking the most likely cause of the problem first, then working their way down. Occasionally, they will take an "easier" thing to check because it'll take less time. Correctly balancing these lists often leads to the quickest, process-of-elimination style victory.
Re:Z&AMM (Score:1)
Re:Critical thinking skills (Score:1)