Other Uses for Lawnmower Engines? 28
heliocentric asks: "I recently cleaned out the garage, and discovered that I am the proud owner of 4 working lawnmower engines. Considering I neither have kids, nor am I one myself, the Go Cart idea which was quick to come to mind, left just as quickly. I'm wondering if the Slashdot community might have some good plans for some spare 5HP lawnmower engines (preferably links to plans as well as ideas)? I am a fan of the junkyard wars as well as BattleBots and all those like them as well I consider myself decent with the welder etc.. But I don't want to make something to harvest hay nor is there local Battlebot group so I am open to other ideas. Think big, think small, but please keep it legal."
Spare engine for your SUV (Score:1)
Spare Lawnmower Motors (Score:1)
Problems (Score:1)
You also need to add a flywheel, since the blade serves as rotating mass.
Outfitting the motor with a pulley, and a used automobile alternator will give a couple of hundred watts of electric power, which may be used as alternative or backup power.
Buts that about the best you can do with it.
Might get you sued, but (Score:2, Funny)
The civic doesn't have more that one lawnmower engine in it.
I should know, I drive one
Power Generator (Score:2)
How about a backup generator?
With a junkyard alternator, you should be
able to generate 12 volts to recharge your
UPS batteries. I'm not sure how efficient the
process would be but it would be fun to try.
InitZero
Build a generator (Score:1)
Essentially, you're taking a lawnmower engine and hooking it up to an alternator extracted from a car. The article suggests using a GM alternator which features a built-in voltage regulator. The output of the alternator is about 14v, and you'll hook this up to one of those cigarette-ligher based 12v->120v voltage inverters. Better yet, charge up some batteries and save the excess power for later.
For more info on running your life on 12 volts, check out Home Power magazine [homepower.com], where you can freely download the entire current issue as a PDF [boycottadobe.com].
Multiple ideas (Score:1)
Microlight? Dirigible? Airboat? Hovercraft? (Score:2)
Re:Microlight? Dirigible? Airboat? Hovercraft? (Score:2)
Maybe it's just me.
Re:Microlight? Dirigible? Airboat? Hovercraft? (Score:2)
No, no. You need rocket engines [darwinawards.com] for that.
Combine suggestions (Score:2)
Re:Combine suggestions (Score:2, Funny)
What to do with a lawnmower engine? Everything. (Score:2, Informative)
You're not going to find plans for the interesting stuff. Most of these machines are REALLY simple, and really require very little in the way of design to make one that works. Plans are for the uncreative. If you're stuck, go to howthingswork.com and look it up. From there, apply the rule of Farmer's engineering: If one inch in diameter is good, two inches is better. Build it good and heavy.
I also wonder, since when is it illegal for an adult to build and operate a go-kart for himself? ATVs are basically souped-up go-karts, you know. Remember, used bicycles usually sell for $20 and are a great source of drive and steering components. One thing I should also mention, a previous poster mentioned using an alternator to build a generator. One problem: Alternators need a DC voltage present to produce a field inside them. If you just run the alternator with a load and no other source of power attached, it won't work.
Next, you have make sure the engines run. I'm going to assume they're Briggs and Stratton vertical shaft engines. You need a mount for safety reasons. Get a piece of plywood, a jigsaw, drill, and some bolts(I think something 3/8" will fit in a B&S base). First you need to make a hole in the plywood that's about three inches in diameter. Drill and jigsaw it out. Now, center the engine over the hole and drill holes for the mounting bolts using the holes in the engine base as a guide for the drill. Bolt the engine to the plywood, and screw the plywood down good and tight to the work bench, or secure it through some other suitable means. Put some gas in the gas tank and take the air filter off. There's a 1" opening underneath. You need to manually choke the engine to make sure the gas is sucked into the carburetor. Hold you hand over the opening while you crank the engine. It should now start, once it has take your hand off the air intake and let it run for a little while before you kill it. If they all run, great, you can get on to building something.
If not, smell the hand that was over the air intake. Does it smell like gasoline? If not, it's likely that the gas line coming into the carb is plugged and you'll need to clean it. Some turpentine should clear out any deposits. If your hand does smell like gasoline, take the spark plug out of the engine. Smell the end of it. Does it smell like gasoline? If not, you need to remove the carburetor and clean it. If so, you need to examine the spark plug. Is the end encrusted with crud? Are the electrodes dirty? If so, clean them up with a wire brush and some emery cloth. Now you're ready to check for spark. Keep the spark plug wire connected to the plug, and hold the plug's metal base against the body of the engine while cranking. You should see a spark. Make sure that you have good electrical contact with the base. If you haven't got any spark, it's best to go buy a good book on small engine repair as you will probably have to remove the flywheel to fix the problem.
Okay, now that you have the engines all running. You can build something. Bicycles, motorcycles and old photocopiers are great sources of drive components. Motorcycles use good and stout drive chains and sprockets, if your local scrappie gets motorcycles, they are deffinitely worth scavenging.
Right now, the only thing that limits the possibilities is creativity. You know, when I was helping to teach a machine shop class I used to tell people something that would really stun them. If you can work machine tools, weld and have a good knowledge of electronics, you can build just about anything you can imagine.
My list. (Score:1)
Blender (not only has it been done, you can buy them commercially - 5hp B&H I think)
Go look at what Moller [moller.com] is doing. Other people have suggested hovercraft, but you have four engines. Moller is using them with a ducted fan to make something that hovers and flys about at higher altitudes.
Hovercraft (not much to that)
Lawnmower - Think I'm silly? You're making it, do it the geek way. How about creating some sort of generator, putting an old motherboard in there, add some electric motors and make the whole thing robotic?
I think a lawnmower engine is a little poorly suited, but the Wheelman is too cool, and begs to be copied.
The world's most nausiating Sit 'n' Spin.
Van De Graff generator [coe.ufrj.br]
Bicycle motor. Just add a rear bike rack. Attach the motor to the rack, and attach a small wheel to the shaft of the motor (actually, some kind of gear reduction box is probably needed) allow the small wheel to engage the rear tire of the bike.
Launcher. Like a scaled up version of a tennis ball server. You could fire nerf footballs or something... Good luck, and be safe!
Construct a tuned pipe for it... (Score:2)
Experiment with alternative fuels and see if you can run your lawnmower engine off the methane produced from your housegold garbage or something.
Tractors. (Score:2)
My great uncle used to make tractors from scratch. He once took a model T engine, made it run backwards (someone told him a model T engine could not be made to run backwards so he called it a challange and did it), decided it was too big and cut it in half, then built a tractor around it.
I can think of many other things to do with an engine, but in the end, when inspiration strikes enough to do something, that is what i'd do with them, so follow your own insperation.
Low-emission lawnmower (Score:2)
Heliocentric!! (Score:1)
Let us know!!