Ask Slashdot: Best Wi-Fi Solution For a Hotel? 300
dynamo52 writes "I have been tasked with replacing a managed Wi-Fi system for a mid-sized hotel. They have already selected Comcast to provide a 100mbps connection, which unfortunately must come in at one corner of the ~5-acre property. The hotel plans to provide this service for free, so there is no need for any type of billing management system, though it should be secured enough that the parking lot does not become a free Wi-Fi hotspot. Additionally, there is no ethernet infrastructure in place. The existing APs (hidden away in proprietary encasements) seem to be connected via telephone lines and the owners have strongly indicated they would prefer that no new wiring be installed. Have any Slashdotters implemented similar systems? Specifically, what hardware did you use and what special considerations should I take in designing this system?"
Well if they getting comcast tv as well then (Score:4, Informative)
Well if they getting comcast tv as well then they may need to rewire the cable system as well any ways. Any way more info on how they AP are setup and linked will help.
And to cut down on free wifi use you can set a password that you just give out to hotel guests.
Checkbox WiFi Hotspot Router (Score:3, Informative)
Re:Dude, I don't wanna shit all over your question (Score:4, Informative)
You have to do a site survey to determine the best layout for the APs including equipment placement, channel patterns and power levels to maximize the best SNR against the overall cost. 2.4GHz or 5GHz or both? What are the structural barriers in place? Do you want to have blanket coverage or only cover certain areas? What level of WLAN redundancy do you want? How much should your coverage overlap? Are you bridging wirelessly? Using extended VLANs, centralizing the traffic and management? How are you handling zone handoff?
There's a lot of initial prep work that goes on before you even begin to place equipment.
Re:Wha? (Score:5, Informative)
OK, while others here have provided good suggestions you are the first to ask specific and relevant questions.
What is the hotel using now and why does it want to replace it?
They are using a third party provider that manages the entire system. This system includes a paywall that they no longer feel is advantageous to their business. Additionally, they are bringing in Comcast to provide telephone and television services as well.
What is a "proprietary encasement," and who put the APs there? Are you expected to put new APs in the same encasements? What will happen to the old APs?
The existing APs are located in individual bottom floor rooms in two story buildings. They are placed in boxes sealed with tamperproof bolts. The only lines in are what appears to be a standard telephone line and a power cable. There is also a telephone line coming out connected to the telephone. Presumably, the company who manages the current system will take the old APs. The existing networking equipment is also protected from closer inspection though does connect through standard telephone punchdown blocks.
You say the hotel doesn't want to lay any new cable. That might just be too bad, but it also seems to imply that there is already some cable somewhere. Why not use the existing cable? You say the APs "seem to be connected by telephone wire," but you don't sound sure. Perhaps it's just long strings with tin cans at each end? Is there any way to find out?
If new cabling is required then so be it. The owners would just rather it be kept to the absolute minimum necessary.
If the existing network is as strange and nonstandard as you make it sound, why is that? Was there something unique to the property that made that the best solution, and is it smart for you to ignore that?
I think the primary reason again was the desire to avoid new wiring.
Before you begin, have you verified that the hotel's contract with Comcast actually allows it to offer Internet access to the public?
Yes
You say the hotel wants to provide the network for free, so there's no need for any billing management system. Are you then comfortable with the idea that there will be no logging of the network at all, and no record of who might have used it and when? Is BitTorrent OK? How about botnets?
The ability to centrally manage the APs is a strong plus. Additionally, logging is not highly critical but the ability to ensure that bandwidth is distributed as equitably as possible would be nice. Yes, I would like the ability to restrict botnets and other undesirable traffic.
If the patrons aren't expected to pay for the network, can they expect it to exist at all? That is, do you have a plan to test and verify that every room will have equal access to the network, and that a guest who came last summer won't return this summer and find out that the hotel doesn't seem to have WiFi anymore (when in fact it's just their new room)?
It should be available throughout. I do plan to test signal strength from every room.
Are you aware of FCC regulations regarding signal strength of your antennas, for those portions of the property that might be natural dark spots?
Yes, I will add APs as needed
Does your task include just replacing the network or does it also include managing the network, making repairs, etc.? How much time do you plan to devote to that?
I will be managing the system also. I do not wish to devote a tremendous amount of time to managing this system once it is in place. A central management console will be highly valued.
Re:Wha? (Score:4, Informative)
Other relevant info:
There are currently ~15 APs on site
The coverage area includes approximately 350 rooms, two courtyards, and the lobby area.
There are four two story buildings that house the rooms.
The total dimensions of the property are ~100m x ~200m
Re:Wha? (Score:5, Informative)
This is just a regular DSL/DSLAM setup. Basically the hotel is acting like a phone company providing DSL, and the phones in the hotel rooms are the "DSL customers". You go to where the hotel's phone switching equipment is at, and hook up a DSLAM which is connected to your public Internet router. You then use that to "provide DSL" to each of the rooms where you want a wired network drop. The chosen rooms (or tamperproof proprietary boxes in your case) have a DSL modem, which splits the ethernet from the POTS.
You can piggyback this over your currently existing phone lines (that's the whole point of DSL), or you an run new Cat 3 lines just for the DSL (if you don't plan to offer wired network service in the rooms, and don't want customers messing with the hardware). Most hotel phone systems have plenty of extra capacity and lines for you to do this without having to install new cable. The reason for using DSL is that ethernet's specs limit it to 100 m, about 85 m in real life in my experience. That's way too short to reach from one end of a hotel to the other. DSL on the other hand is good out for several km.
It's pretty straightforward stuff if you've done any networking setup. The same stuff about regular DSL applies (e.g. use filters on any extra extensions). And unlike DSL from the phone company, you have to deal with both ends of the service. Most hotels use VDSL/VDSL2 because it allows higher bandwidth over a shorter distance. ADSL is really optimized for Cat 3 distances of several km, which isn't necessary for a hotel, and its max uplink throughput may be insufficient for a heavily used public WAP. I'd provide links but I did this about 5 years ago, so the links I have would likely be outdated.
Once you get the DSLAM and DSL modems set up, they act as a bridge and are transparent. The WAPs will show up on whatever LAN you have plugged into the DSLAM. If you want (and I would recommend), you can make it its own subnet. Assign static IPs to the WAPs so you can manage them. The fancier models will even let you set up VLANs, so you can do fancy things like limit direct access to the WAPs to a VLAN that's not available to customers connecting over the wireless (provided the WAPs are VLAN-aware). You will also have to handle QoS and bandwidth throttling, to prevent a single customer from using up all the bandwidth. But that's a given.
Leases (Score:5, Informative)
Re:No Offense... (Score:2, Informative)
My intent was to simply disregard this post and instead only pay attention to those posters who provided constructive input and advice. In truth however, I do take offense to your comment. I am a professional who has managed network environments for a wide array of businesses in various industries. The scale and scope of this project are well within my operating parameters and I have little doubt that whatever solution I end up deploying for this client will provide the services required in a reliable and cost effective manner. Furthermore, I know my own strengths and weaknesses. I fully recognized that there were particular aspects to this deployment that I have not encountered so I knew some amount of research would be necessary prior to even making recommendations. As part of this research it occured to me that Ask Slashdot might be a perfect forum through which I could gain tremendous value by the collective knowledge of all who visit this site. This has proven to be more true than I could have anticipated.
Prior to asking, my preferred course of action for this job was and still is to simply run new cabling and deploy a series of centrally managed POE APs. After that the choice would be a fairly simple one of platform and hardware, though thanks to Slashdot I have found a couple of interesting options ofwhich I had not previously known. I also had considered mesh networks but as I had not personally deployed any I wanted feedback on the reliability of such systems. Again, Slashdot provided valuable insight. I will fully admit that I was not completely familiar with the backend infrastructure of their DSLAM setup, though once I understood what it I was looking at the logic of the system is readily apparent and there is a strong argument to be made in favor of simply mirroring this system. If this is the chosen course of action, through a little blood and sweat, I could probably punch down the blocks myself and configure the DSLAM and modems, but more likely I will work with an existing colleague or find one more skilled in these particular tasks (and hopefully learn something along the way). In short, I do have the resources to make this happen as well should the need arise.
So I'm sorry my lack of jargon and unnecessary technical info causes you to question my skills but I am fully confident my ability to listen to the client, understand their needs, and communicate with them effectively, combined with my attention to detail and the simple ability to get things done will in the end leave them better served than most of these "professionals" of whom you speak.